Vakuumbett SOLO – luftdicht
Preis : 632.02 EUR
Wie viel kostet Versand?
Stand : Herstellung nach Mass nach der Bestellung
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex measurements needed for latex vacbed with sleeves

Endlich ein Vakuumbett zu Selbstbenutzung!

Es ist ohne Reißverschluss verfertigt, es hat ein Einrichtungsventil. Deswegen ist es luftdicht und Sie können es ohne Lärm von dem laufenden Staubsauger genießen!

Der Eingang ist durch Ihren Kopföffnung. Was das Vakuumbett noch hat, sind Ärmel nach Maß. Das verursacht, dass die Luft keine Chance hat, ins Bett vorzudringen (es ist nach Wunsch möglich, Handschuhe anzuschließen)

Standardstärke ist 0.4mm , Größe 200x100 cm . Nach Wunsch auch stärker oder länger möglich. Wir empfehlen, die Unterseite stärker und die Oberseite dünner zu haben, um stärkere Bondage und perfekte Anpassung der Oberseite zu erreichen.

Verpackungsinhalt: Latexsack, Rahmen mit dem Einrichtungsventil und mit einem Staubsaugeradapter (für alle Staubsauger).

Nach Ihrer Bestellung schicken Sie uns bitte Ihre Maße per Email:
- Bizepsumfang
- Handgelenkumfang
- Entfernung zwischen Achselhöhle und Handgelenk
- Halsumfang
- Entfernung zwischen Ärmeln ( V-A – siehe das Diagramm links)
- Entfernung zwischen dem Hals und Ärmeln ( V-B )
- wenn das Vakuumbett auch ein Loch oder ein Kondom im Schritt haben soll, dann auch die Entfernung zwischen dem Halsloch und dem Loch im Schritt. ( V-C ).

Das Bett können wir auch mit diesen Accessoires ausrüsten:

Weiterlesen
Verfügbare Ergänzungen
Ergänzung Preis :
Farbe nach Ihrer Wahl0 EUR
Rahmen – standard ( Kunststoff )0 EUR
Rahmen - Extra starker Edelstahlrahmen235.18 EUR
Hände - mit angeschlossenen Handschuhen65.22 EUR
Kragen nach Maß - angeschlossen, luftdicht - Kopf ist draussen0 EUR
Airtight-attached made to measure mask without face154.15 EUR
standard Stärke 0.4 mm0 EUR
Stärke 0.5mm – Für eine Seite. Für beide Seiten wird der Preis verdoppelt.19.76 EUR
Stärke 0.8mm ( Möglich nur für das Unterteil. Das Oberteil muss dünner sein.)57.31 EUR
Stärke 1.1mm ( Möglich nur für das Unterteil. Das Oberteil muss dünner sein.)88.89 EUR
Öffnung im Schritt ( luftdicht nur für Männer )6.72 EUR
angeschlossene Penisshülle ( luftdicht ) 47.43 EUR
Länge 220 cm ( nur mit Kunststoff Rahm )39.13 EUR
Expressherstellung+50%
Verfügbare Ergänzungen
Endlich ein Vakuumbett zu Selbstbenutzung!

Es ist ohne Reißverschluss verfertigt, es hat ein Einrichtungsventil. Deswegen ist es luftdicht und Sie können es ohne Lärm von dem laufenden Staubsauger genießen!

Der Eingang ist durch Ihren Kopföffnung. Was das Vakuumbett noch hat, sind Ärmel nach Maß. Das verursacht, dass die Luft keine Chance hat, ins Bett vorzudringen (es ist nach Wunsch möglich, Handschuhe anzuschließen)

Standardstärke ist 0.4mm , Größe 200x100 cm . Nach Wunsch auch stärker oder länger möglich. Wir empfehlen, die Unterseite stärker und die Oberseite dünner zu haben, um stärkere Bondage und perfekte Anpassung der Oberseite zu erreichen.

Verpackungsinhalt: Latexsack, Rahmen mit dem Einrichtungsventil und mit einem Staubsaugeradapter (für alle Staubsauger).

Nach Ihrer Bestellung schicken Sie uns bitte Ihre Maße per Email:
- Bizepsumfang
- Handgelenkumfang
- Entfernung zwischen Achselhöhle und Handgelenk
- Halsumfang
- Entfernung zwischen Ärmeln ( V-A – siehe das Diagramm links)
- Entfernung zwischen dem Hals und Ärmeln ( V-B )
- wenn das Vakuumbett auch ein Loch oder ein Kondom im Schritt haben soll, dann auch die Entfernung zwischen dem Halsloch und dem Loch im Schritt. ( V-C ).

Das Bett können wir auch mit diesen Accessoires ausrüsten:

Verfügbare Ergänzungen
Ergänzung Preis :
Farbe nach Ihrer Wahl0 EUR
Rahmen – standard ( Kunststoff )0 EUR
Rahmen - Extra starker Edelstahlrahmen235.18 EUR
Hände - mit angeschlossenen Handschuhen65.22 EUR
Kragen nach Maß - angeschlossen, luftdicht - Kopf ist draussen0 EUR
Airtight-attached made to measure mask without face154.15 EUR
standard Stärke 0.4 mm0 EUR
Stärke 0.5mm – Für eine Seite. Für beide Seiten wird der Preis verdoppelt.19.76 EUR
Stärke 0.8mm ( Möglich nur für das Unterteil. Das Oberteil muss dünner sein.)57.31 EUR
Stärke 1.1mm ( Möglich nur für das Unterteil. Das Oberteil muss dünner sein.)88.89 EUR
Öffnung im Schritt ( luftdicht nur für Männer )6.72 EUR
angeschlossene Penisshülle ( luftdicht ) 47.43 EUR
Länge 220 cm ( nur mit Kunststoff Rahm )39.13 EUR
Expressherstellung+50%
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex
airtight latex vacuumbed with sleeves and collar in metallic red 0.4mm latex


Vacbed – manual
www.eurocatsuits.com

Dear Customer,
You will have lots of fun with this vacbed . However , there are some rules , which need to be adhered to in order to operate it safely . We have prepared few tips for you . Please read them before you using the vacbed .

BEFORE FIRST USE :
The latex sack of the vacbed is covered with talcum powder , which protects it during transport and keeps the latex from sticking to itself . Before first use , wash the latex sack with soap and water on both sides , let it dry and then apply latex polish both on inside and outside .

ASSEMBLY :
Because the entry opening is small , you need to assemble the frame inside the sack . Start with the pipe at the feet and work your way to the top pipe behind the head . The valve should be inserted into sleeve from inside and then joined with frame . The sleeve should be smooth around the valve , free of any wrinkles - thru them air may penetrate into the vacbed . It helps to lubricate the pipes and the inside of the sack with latex polish ( do not use talc on inside of vacbed - it may cause valve malfunction) .

ENTERING THE VACBED :
Entry is thru the neck opening . Latex is stretchy enough for entire body to squeeze thru . Grab the neck opening with both hands and expand it enough so you can squeeze gradually your legs and body thru it . However , you need to be very carefull to not to pull with your fingernails – under tension , latex may rip . When your body is inside , insert your hands into the sleeves . It helps , if they are lubricated with latex polish-lubricant on inside . Then smooth out any wrinkles on the collar / hood and the sleees to keep the air from getting in .

AIR EVACUATION :
Safety first ! Before you turn the vacuumcleaner on , make sure :
that you can move your hands freely to access the valve , vacuumcleaner and your neck
that the collar / hood is not choking you and that it doesnt restrict your bloodflow . Same applies to the sleeves

Attach vacumcleaner to the vacbed . When the air is completely evacuated , disconnect the vacuumcleaner from vacbed and then turn it off . If you turn the vacuumcleaner off , while still conneced to vacbed , some air may get back into the vacbed , because for proper function , the valve needs sudden pressure change .

GETTING OUT :
Simply pull the collar / hood away from your neck . Vacbed will instantly inflate . Then pull your hands out of the sleeves and squeeze them around your neck outside . Now using your hands to expand the neck opening , get the rest of the body out .

CLEANING :
After each use , wash the vacbed with soap and water ( both inside and outside ) . Then let it dry on dark and cool place . After it dries on one side , turn it inside out , so both sides can dry .

IF THE VACBED DOESN´T HOLD VACUUM
If the vacbed holds vacuum for no more than five minutes or so , you need to find the leak . Usually its caused by some wrinkle somewhere . Check that the collar / hood seals around your neck properly . Check the sleeve around the valve . Check sleeves and make sure that they are wrinkle-free and that they seal properly around your wrist . If this doesn´t help , check the valve : dip about 2 cm of the narrow end of the valve in the water and try blowing into it from other side . There must be no bubbles coming out of it . If bubbles do come out , try running some water thru it , let it dry completely and then put few drops of silicone oil into it ( from the narrow side ) . Then test it again .

If you have any problems whatsoever and you don´t find answer in this manual , please feel free to ask questions . We wish you many pleasant moments with our latex vacbed.

Your Eurocatsuits.com
Vergessen Sie nicht auch Poliermittel (Ohne Poliermittel würde Ihr Latex glanzlos) und Talk (erleichtert Ankleidung ) zu bestellen !
Fein gemahlener Talk
11.82 EUR
Latexpoliermittel
17.39 EUR
Water-based latex lubricant , 600ml
17.75 EUR

© Eurocatsuits.com 2006-2024
Made in EU ( Czechia ) . Sold exclusively on Eurocatsuits.com .
All images and videos used on this website are our own and we do not permit their use for commercial purposes anywhere else . If you see any item being offered with same image as ours - its pirated image and the item is fake. We dont sell on Ebay nor Aliexpress ... nor do we buy from there . There is fake vendor on Aliexpress , pretending to be Eurocatsuits - beware .