Latex vacbed with collar - airtight
Price :446.72 EUR
How much will be the shipping costs ?
Status :Item is made to measure after you order
Latex vacbed , sealed all around , with made-to-measure neck entry . This allows you to have the head outside and still maintain 100% bondage.

girl in vacbed made from metallic pewter latex girl in vacbed made from metallic pewter latex girl in vacbed made from metallic pewter latex girl in vacbed made from metallic pewter latex
girl in vacbed made from metallic pewter latex girl in vacbed made from metallic pewter latex

Unlike our regullar vacbed , this one is not sealed by rolling the excess material at the end . Instead , its glued shut all around , which makes the sealing even easier . Entry into the vacbed is via very elastic latex collar , which is made to measure for you ( no matter what size you are , you can get in ) . All this and our one-way valve makes this vacbed airtight , so you can enjoy it without running vacuumcleaner .

Advantages of this vacbed :
- even people with sensitive ears can enjoy this vacbed , because the head is outside
- if you are the master , you have great access to head of your subject - you can put on latex masks , gags etc ...
- sealing is dead easy - you don´t have to seal it !

Standard size is 200 x 100 cm . Package includes :
- frame with one way valve ( plastic frame is standard , stainless steel frame optional )
- latex sack

Read more
Available options
Option Price :
Color of your choice0 EUR
standard frame – plastic0 EUR
extra strong stainless steel frame139.34 EUR
attached made to measure airtight collar ( head is then outside )0 EUR
Airtight-attached made to measure mask without face92.21 EUR
standard thickness 0.4 mm0 EUR
Thickness 0.5mm – for each side20.49 EUR
Thickness 0.8mm – possible only for bottom59.43 EUR
Thickness 1.1mm – possible only for bottom92.17 EUR
airtight opening in crotch ( airtight only for men )4.06 EUR
airtight attached penis sheath42.99 EUR
Length 220cm ( only with plastic frame ) 38.89 EUR
Express manufacture+35%
Available options
Unlike our regullar vacbed , this one is not sealed by rolling the excess material at the end . Instead , its glued shut all around , which makes the sealing even easier . Entry into the vacbed is via very elastic latex collar , which is made to measure for you ( no matter what size you are , you can get in ) . All this and our one-way valve makes this vacbed airtight , so you can enjoy it without running vacuumcleaner .

Advantages of this vacbed :
- even people with sensitive ears can enjoy this vacbed , because the head is outside
- if you are the master , you have great access to head of your subject - you can put on latex masks , gags etc ...
- sealing is dead easy - you don´t have to seal it !

Standard size is 200 x 100 cm . Package includes :
- frame with one way valve ( plastic frame is standard , stainless steel frame optional )
- latex sack

Available options
Option Price :
Color of your choice0 EUR
standard frame – plastic0 EUR
extra strong stainless steel frame139.34 EUR
attached made to measure airtight collar ( head is then outside )0 EUR
Airtight-attached made to measure mask without face92.21 EUR
standard thickness 0.4 mm0 EUR
Thickness 0.5mm – for each side20.49 EUR
Thickness 0.8mm – possible only for bottom59.43 EUR
Thickness 1.1mm – possible only for bottom92.17 EUR
airtight opening in crotch ( airtight only for men )4.06 EUR
airtight attached penis sheath42.99 EUR
Length 220cm ( only with plastic frame ) 38.89 EUR
Express manufacture+35%
Latex vacbed , sealed all around , with made-to-measure neck entry . This allows you to have the head outside and still maintain 100% bondage.

girl in latex vacbed made from metallic pewter latex woman in latex vacbed made from metallic pewter latex , wearing black latex mask foot in metallic pewter latex vacbed girl in latex vacbed made from metallic pewter latex girl in vacbed made from metallic pewter latex hand in metallic pewter latex vacbed
Vacbed - manual - www.eurocatsuits.com

Dear Customer,
You will have lots of fun with vacbed you have just received . However , there are some rules , which need to be adhered to in order to operate it safely . We have prepared few tips for you . Please read them before you use the vacbed .

SAFETY FIRST :
- never use this type of vacbed alone . It is very strong bondage device and you may not be able to get out without help from outside , if anything goes wrong .
- Before turning the vacuumcleaner ON , ask for permission from the person inside .
- For case of emergency , establish “stop-signal” with your partner . Whenever this signal is used , partner on outside should immediately release the vacuum and help you to get out . “Stop signal” must NEVER be ignored .
- When you are watching over somebody in vacbed , never leave him alone , never let him out of sight and always stay within few metres of the vacbed , so you can intervene in case of need .

BEFORE FIRST USE :
The latex sack of the vacbed is covered with talcum powder , which protects it during transport and keeps the latex from sticking to itself . Before first use , wash the latex sack with soap and water on both sides , let it dry and then apply latex polish both on inside and outside .

ASSEMBLY :
Because the entry opening is small , you need to assemble the frame inside the sack . All parts of the frame are inserted inside via the neck opening . It helps to lubricate the pipes and the inside of the sack with latex polish ( do not use talc on inside of vacbed - it may cause valve malfunction) .

AIR EVACUATION :
Attach vacumcleaner to the vacbed . Ask the person inside for permission to turn it on . Only then turn the vacuumcleaner on . When the air is completely evacuated , disconnect the vacuumcleaner from vacbed and then turn it off . If you turn the vacuumcleaner off , while still conneced to vacbed , some air may get back into the vacbed , because for proper function , the valve needs sudden pressure change .

RELEASING VACUUM :
Simply stretch the neck seal to let the air in.

CLEANING :
After each use , wash the vacbed with soap and water ( both inside and outside ) . Then let it dry on dark and cool place . After it dries on one side , turn it inside out , so both sides can dry .

IF THE VACBED DOESN´T HOLD VACUUM
If the vacbed holds vacuum for no more than five minutes or so , you need to find the leak : Check the valve : dip about 2 cm of the narrow end of the valve in the water and try blowing into it from other side . There must be no bubbles coming out of it . If bubbles do come out , try running some water thru it , let it dry completely and then put few drops of silicone oil into it ( from the narrow side ) . Then test it again . Make sure that the neck gasket has no wrinkles in it and that it fits snugly around the neck . The same applies to the sleeve around the valve .

If you have any problems whatsoever and you don´t find answer in this manual , please feel free to ask questions . We wish you many pleasant moments with our latex vacbed

Your Eurocatsuits.com
Don´t forget to add to your order : talc ( makes dressing up easier ) - and latex polish ( enhances natural gloss of latex )
Talc powder
7.34 EUR
Latex polish & lube
14.3 EUR
Water-based latex lubricant , 600ml
16.35 EUR

Tell us what you think !


© Eurocatsuits.com 2006-2019
Made in EU . Sold exclusively on Eurocatsuits.com